Working principle
The planetary dispersing mixer has high-speed, low-speed, and movable scraper blades for stirring, shearing, scraping, and dissolving. The low-speed operation of the mixing anchor causes the material to flip, shear, and mix up and down in a closed container. The high-speed operation of the toothed dispersing disk produces strong collision and shear with the mixed material. As the mixing anchor rotates, the movable scraper on the planetary carrier rotates to completely scrape off the material on the kettle body, ensuring that the aggregates meet the requirements of mixing, dispersion, and dissolution completely and thoroughly. Under its different effects of high and low speeds, the material can achieve uniform mixing and dispersion.
Product parameters
|
Mixer |
Design volume |
2.5L |
|
Working volume |
2L |
|
Low speed mixing system |
Stirring power |
0.75KW |
|
Revolution speed |
0-65rpm/min |
|
Rotational speed |
0-170rpm/min |
|
Mixing blade form |
Spiral Fried Dough Twists |
|
Material |
304 stainless steel |
|
High-speed decentralized system |
Strong dispersion speed |
1400rpm/min (adjustable) |
|
Distributed motor |
0.55KW |
|
Dispersion disk diameter |
40mm |
|
Material |
304 stainless steel |
|
Scraping the wall |
Quantity |
1 group |
|
Material |
SUS304 and Teflon |
|
Speed |
Consistent with the planetary revolution speed |
|
Lifting system |
Power up and down |
0.18kw |
|
Elevating height |
Be pending |
|
Vacuum system |
Vacuum power |
0.12kw |
|
Vacuum degree |
≤－0.09Mpa |
|
Jacket |
Double layered jacket, can be heated or cooled by water or oil |
Product features
High mixing efficiency: Designed with a planetary gear reducer, the compound motion of the mixing blade's revolution and rotation can achieve uniform mixing of materials in a short period of time, which is more efficient than ordinary mixers.
Wide applicability: It can handle materials with viscosity ranging from 10000-1000000 CP and is suitable for mixing, reacting, and other processes of multi-component solid solid, solid-liquid, and liquid-liquid materials.
There are various forms of mixing: there are spiral, frame, finger, and butterfly forms of mixing blades to choose from, and different planetary dispersion combinations such as single frame, single dispersion, double frame, and double dispersion can also be selected according to needs.
Fully functional: equipped with hydraulic lifting system, vacuum system, etc., it can achieve vacuum operation, heating, cooling and other functions, and can also integrate automatic discharge and other functions to meet different process requirements.
Application field
New energy: Preparation and research and development of electrode slurries (positive and negative electrodes) for lithium-ion batteries.
Electronic chemicals: conductive silver paste, conductive silicone grease, encapsulation adhesive, solder paste, etc.
Adhesives: epoxy resin adhesive, silicone sealant, polyurethane sealant, etc.
Medicine and cosmetics: ointment, gel, cream, toothpaste, lipstick, etc.
Food industry: sauces, chocolates, candies, etc. (must meet food grade standards).
Chemical materials: various inks, coatings, pigments, polymer composite materials, etc.
Precautions
1. Do not operate mixing or dispersion while the lid is open.
2. Do not raise the pot lid too high. Observe while touching the upper limit and lid tightly to ensure safety.
3. Grounding the power supply wire to ensure electrical safety.
4. Before carrying out any maintenance or cleaning, the equipment must be disconnected from the power supply.
5. Never put your hands into the pot or touch any moving parts during the operation of the equipment to prevent accidents.
6. If there is any abnormal response during operation, stop running immediately and wait to investigate the cause before starting up.
